1.
To attach the All-Purpose Scrubber Pad, place the pad
exterior side down on a flat surface and insert the top of the
Flat Scrubber Tool into the top portion of the pad and then
pull the pad over each side of the back edge.
2.
Press the Flat Scrubber Tool onto the Accessory Hose until
it clicks into place. (Fig. 23)
3.
Select either DUST, MOP or SCRUB mode by pressing the
ON/STEAM SETTING button and wait until the selected
setting indicator light turns solid blue. Hold down the steam
trigger to start steaming. (Fig. 24)
4.
To remove the Flat Scrubber Tool, press and hold down the
Accessory Hose release button. Then slide out the Flat
Scrubber Tool. (Fig. 25)
USAGE
EN
Flat Scrubber
CLEANING TIP
The Flat Scrubber is designed for cleaning a variety
of surfaces and is exceptional on those that are
large and flat including counter tops, table tops,
walls mirrors, windows, stairs, shelves and other
similar surfaces. Super absorbent bonnet loosens,
lifts, and locks in dirt and grime while sanitising at
the same time.
CAUTION
Do not press the steam trigger while attaching or
removing the Flat Scrubber Tool!
Do not use the Flat Scrubber Tool without the All-
Purpose Scrubber Pad attached!
(Fig. 23)
(Fig. 24)
(Fig. 25)
40