SAFETY
EN
19.
Carefully remove the microfiber pocket immediately after you
have unplugged and allowed the appliance to cool.
20.
When cleaning the steam mop, unplug the power cord from
the electrical outlet and clean with a dry or damp cloth. Do
not pour water or use alcohol, benzene or paint thinner on
the unit.
21.
Extreme caution should be exercised when using this
appliance to clean stairs. Never use steam mop without
microfiber pocket attached.
22.
Store steam mop indoors in a cool, dry place.
23.
To avoid circuit overload, do not operate another appliance
on the same socket (circuit) as the steam cleaner.
24.
If an extension cord is absolutely necessary, an extension
cord rated a minimum of 2.5 mm
2
cord and 4m in length
should be used. Cords rated for less amperage may overheat.
Care should be taken to arrange cord so that it can not be
pulled or tripped over.
25.
DO NOT leave the appliance unattended when the system
is connected to a power supply/electrical outlet.
26.
DO NOT store unit with damp or wet microfiber cleaning
pocket attached. Never leave the steam mop in one spot on
any surface for any period of time with a damp or wet
microfiber cleaning pocket attached as this will damage your
floors.
27.
Always unplug and allow the appliance to cool before removing
or changing mop heads.
WARNING!
2 in 1 Professional Steam Mop is designed to clean hard
floor surfaces and to create a hygienic enviroment. It is
not recommend to use it on wooden floors which are
sensitive to water (passes water inside). Long term use
on a fixed point of polished surfaces, may let the surface
lose its brightness. It is always recommended to test an
isolated area of the surface to be cleaned before
proceeding. We also recommend that you check the use
and care instructions from the floor manufacturer.
27
IMPORTANT
Wash and dry the microfiber cleaning pads without any
detergent before first usage.