USAGE
EN
2.
First attach the Direct Steam Nozzle by pressing the nozzle onto
the Handheld Steamer until it clicks into place. (Fig.16)
CAUTION
Do not press the steam trigger until the Direct
Steam Nozzle is snapped into the main nozzle of
your Handheld Steamer.
(Fig. 16)
(Fig. 17)
4.
To remove the Direct Steam Nozzle, press and hold down
the Handheld Release Buttons. Then slide out the Direct
Steam Nozzle using the grip.
CAUTION
Do not press the steam trigger while removing the
Direct Steam Nozzle. Avoid touching the tip of the
Direct Steam Nozzle, as this will be very hot after
steaming.
NOTE
The Handheld Steamer may continue to emit steam
for a few seconds after the trigger is released. This
is normal, and the steaming will eventually come
to a stop.
3.
The Handheld Steamer is automatically set to SCRUB mode.
Squeeze the steam trigger to activate steam. To change modes
press the ON/ STEAM SETTING button to select either DUST,
MOP or SCRUB mode. You can change the steam mode while
the Handheld Steamer is in standby or in use. Once the selected
setting indicator light has turned blue, hold down the steam trigger
to start steaming. (Fig. 17)
37