25
USAGE
GB
Having selected and installed the desired
accessory, check to ensure that the interior
of the appliance
(A)
and all the accessory
compenents are dry.
• Unwind the mains lead and install the
plug into the power socket.
• Switch on the appliance by lightly pressing the ON/OFF
switch.
B- Suction Power Control -
An air intake control is
located in the handle of the suction hose with which you
can reduce the suction power if e.g. the carpet or mat lifts
from the floor under excessive suction power. For Max.
Suction Power
- Push control slide forward (aperture in handle closed).
For Min. Suction Power - Push the control slide to the rear
(aperture in handle open).
Dry Vacuum Cleaning
Wet Vacuum Cleaning
C-
Release the canister clamps, remove hood, filter
cartridge and paper filter if fitted. To remove the filter, turn
the filter retaining clip anticlockwise and pull off the filter
cartridge togeher with the base plate.
D- Foam Plastic Filter -
Install the foam plastic filter if it is
intended to remove a mixture of liquid and dirt or waste
matter.
To do this, push the filter on to the float valve retainer as
far as it will go. Slightly contaminated water can be
removed without installing the foam plastic filter. Place the
hood an the canister, fasten the canister clamp and install
the desired cleaning accessory.
• Unwind the mains lead and install the plug into the
power socket.
• Switch on the appliance by light pressure on the On/OFF
switch.
