Fakir AROMA MASTER, Руководство по эксплуатации

Страница: 30 / 88

30
EN
Setting the Clock
The first time you plug the appliance in, you must first set the clock of the appliance.
1. Plug in the appliance.
2. The display will show 0:00 and the clock section will flash.
3. Use the up and down “ / ” navigation buttons to set the time. Press the on-off button
to approve.
4. The minutes section will start flashing after the clock is set. Again, Use the up and down “
/ ” navigation buttons to set and press the control button to approve.
NOTE !
If you unplug the appliance, the setting of the previously adjusted time will disappear, so
you need to reset the clock when you plug it in again.
Changing the Set Time
If you want to change the time you have set on the display, you can change it from the
Program Mode by following the steps below, or you can reset the device clock by plugging
and unplugging the appliance.
1. Turn the control knob to Program. ‘’Program’’ LED light will light up. The time and minute
you set on this display is not the time that you set for the appliance but it is the time to
program your coffee for brewing.
2. Press and hold the on /off button for 3 seconds and the set time of the appliance will
appear on the display.
3. Use the navigation buttons to reset the time and approve it with the on /off button.
C/W Raito
It indicates the ratio of the amount of coffee to water. It shows how many solids of water will
flow from the water tank into the carafe.
For example: If the C/W ratio is 1:15, for 1 gr of coffee 15 ml of water will flow from the
compartment to carafe.
If the C/W Ratio is 1:15, you should put 40 g of coffee to make 600 ml of coffee.
NOTE !
It is recommended that you do not fill more than 750ml of water into the coffee carafe.
WARNING!!
The amount of coffee to be placed in the automatic mode should not exceed 50gr.