Fagor SPM, Руководство пользователя

Страница: 8 / 86

Fagor Automation S.Coop
SPM motor manual
vi
1. NOTES ON USE
• Observe the following items to avoid electrical shock or injury.
• Ground the ground terminals of the inverter and the motor (or ground the metal-
lic part such as frame in case of no ground terminal) according to local and/or
national electrical codes.
Failure to observe this warning can result in electrical shock.
• User grounding wires of a size complying with relevant international or local
standards.
• Do not damage the cables or apply excess stress; do not place heavy objects
on the cables or clamp the cables.
Failure to observe this warning can result in electrical shock.
• Use only the specified combinations of the inverter and the motor.
Failure to observe this caution may result in fire or malfunctions.
• Use the shortest cables possible. Separate the power cables from the signal
cables. The noise in the cable may cause the equipment to vibrate or run
improperly.
• Never use at locations exposed to water splashes, corrosive and inflammable
gases, or near combustible substances.
Failure to observe this caution may result in fire or malfunctions.
• Use under the following environmental conditions:
[1] Indoors where no corrosive or explosive gas exists.
[2] Well - ventilated without dust or metallic particles.
[3] Ambient temperature from 0
°
C to +40
°
C and free from freezing.
[4] Humidity from 20% to 80% [non - condensing].
[5] Altitude 1000 metres above sea - level.
[6] Easy to check, clean and maintain.
For use at locations where the excessive water or oil splashes exist, use a
cover or other protection. It is recommended to place the terminal box upward.