Fagor SPM, Руководство пользователя

Страница: 52 / 86

Fagor Automation S.Coop
SPM motor manual
38
• The rotor is dynamically balanced with the key inserted in the keyway. It is
important that the pulley half-joint or rack be dynamically balanced [without
the key] before inserting them in the transmission shaft.
• When the motor turns at high speed, any mechanical disturbance may
cause vibration. Any vibration while the motor is running indicates an
unbalanced gear box and must be corrected.
Joints, pulleys, pinions, etc. must be mounted exactly and using the proper tools. Never
use a hammer to do this because it could damage the bearing and the accessories.
fig.5 Transmission gear installation. Do not use a hammer
• Before mounting the transmission gear, remove the anticorrosion paint of the motor
shaft and keyway using alcohol or the right solvent.
• Lubricate the end of the shaft and the keyway before inserting the gear and mount it as
instructed by the manufacturer
.