40i - Installation/Operation - DRO operation - (15/40)
2.5.7
Probe
The probe stores the data about the probed points in a USB memory. The probing data may be read and
processed at a PC.
The file containing the probed points is:
FAGOR/DRO/PROBE/probe.csv
The format of the generated file is “
csv
” (comma separated values) and may be easily imported into a
spreadsheet.
When using the USB-RS232 adapter, the probe data will be sent to the PC in the same format.
RS232 communication parameters:
Baudrate:
9600 Baud
Number of bits: 8
Stop bits:
1
Parity:
none
From the left column to the right, the values correspond to the 1st, 2nd and 3rd axis respectively:
For example:
100.000 , 132.035 , 0.435
133.005 , 132.035 , 0.435
870.020 , 132.435 , 0.435
133.870 , 132.035 , 0.435
191.890 , 205.545 , 10.540
2.5.7.1
Turn the probe ON and OFF
Connect a USB memory to the DRO and wait for 4 seconds for the DRO to configure the memory.
To turn the probe mode ON.
The icon shows that the probe mode is ON. The data captured
by the probe is saved in the file.
The probe MUST be turned OFF properly before extracting the
USB memory so as not to lose any probing data.
To turn the probe mode OFF.
Note:
Do not unplug the USB memory until the DRO completes the safe extraction sequence.
