40i - Installation/Operation - DRO operation - (12/40)
Alpha:
Inclination of the matrix of holes.
N 1:
Nr of holes along the X axis.
N 2:
Nr of holes along the Y axis.
2.5.4
Go to
This function is the alternative to the most commonly used
positioning method consisting in presetting an incremental zero
at a point and moving the axis until the display shows the
desired coordinate. The
Go to
function may be used to do the
same in the opposite direction, you enter the coordinates of the
target point and the DRO screen shows these values with the
negative sign. The operator must move the axes to zero. The
advantage of using this method is that the operator does not
have to memorize the target coordinates, he simply has to
move the axes to zero.
When presetting a value on an axis, press
ENTER
to go on to
the next axis and validate the data just entered.
2.5.5
Calculator function
It may be used to carry out mathematical and trigonometric
operations as well as preset the desired axis with the result of
the calculation or import the displayed coordinate values into
the calculator to carry out math operations.
Different types of calculators may be selected at the function
bar: Arithmetic, trigonometric and for square functions.
Numeric calculator. Functions:
+ - x /
Trigonometric calculator. Functions:
Sin, Cos, Tan.
Functions:
To
Exit
the calculator,
Set
an axis with the result or
Insert
a value into the calculator.
Exit the calculator.
Set one of the axis with the result of the calculator. To do this, access the calculator by
pressing the Calc button of the function bar on the
Preset
screen.
Enter the value of an axis, PI or 2PI into the calculator.
Function
Go to
Function
Calculator
Numeric
Trigonom
Square
Function
Exit
Set
Insert
