12
Fig.11
Fig.12
−
Clean the washing and rinsing injectors
−
Clean the tub appropriately with a water jet, removing all the residues that are stuck to it.
−
Clean the racks daily.
Fig. 13
−
Re-assemble all the devices in their correct place, keeping in mind the following:
−
The short side of curtains should face towards the dishes entrance.
−
The nozzles should be aimed towards the dishes.
−
Keep the door open to avoid bad smells forming.
Saving energy
−
The machine only works when racks are put in.
Dispensers
−
Detergent and rinse aid dispensers are not supplied with the machine. These are necessary for a
correct final wash and rinse.
−
The conections between the detergent doser, the rinse doser and the safety end switch with the
binding clamp should be done as shown in figure 7
Table limit switch (safety end switch)
−
This safety switch is to avoid rack jam at exit table if it is required. See fig.7 for electric
connection.
