Fagor CNC 8060, Конфигурация оборудования

Страница: 47 / 112

Hardware configuration.
CNC 8060
4.
·47·
(R
EF
: 1709)
CN6
0-10H /
C
N
60-10
HT CN6
0-10V /
CN
60-10
VT
CN60
-1
0
K.
·F2A· Protection fuse.
·H29· Compact flash
·H30· USB port.
·H31· Ethernet.
The module has a F2A (fast 2A) fuse that may be accessed
from the outside to protect against over-voltage (greater than
36 V DC or 25 V AC).
Additional storage space for user programs.
Fagor Automation offers several flash compact in its catalog to increase storage space; if you are going
to use other compact flashes, always use industrial grade compact flash SLC; they support
temperatures between -40ºC and +80ºC (-40 ºF and 176 ºF) and last 27 years with 1000 writes per day.
Fagor Automation shall not be held responsible for any problems caused by using other lower-quality
compact flash.
Type A USB connector.
Pin. Signal.
1 + 5 V
2 DT -
3 DT +
4 11
1 4
No USB devices must be used nor connected while executing a part program. Using USB devices may
slow down the execution or cause some "RT-IT overflow" type error.
DO NOT connect any kind of hub to the USB port.
See "4.7.5 Connection to an Ethernet network." on page 61.
8-pin RJ45 connector and 2 status LED's.
Pin. 10Base-T (10/100 Mhz). 1000Base-T (1000 Mhz).
1 TX+ (transmit data). BI_DA+
2 TX- (transmit data). BI_DA-
3 RX+ (receive data). BI_DB+
4 - - - BI_DC+
5 - - - BI_DC-
6 RX- (receive data). BI_DB-
7 - - - BI_DD+
8 - - - BI_DD-
A Connection LED. The LED turns on when the central unit is
connected to network.
B Activity LED. The LED blinks when data is being transferred.
1
8
A
B