Fagor CNC 8060, Конфигурация оборудования

Страница: 32 / 112

Hardware configuration.
CNC 8060
4.
·32·
(R
EF
: 1709)
CN6
0-10H /
C
N
60-10
HT CN6
0-10V /
CN
60-10
VT
CN60
-1
0
K.
4.1 Specifications.
Type. Description.
General. • Monitor and keyboard set with the central unit attached on the rear. The
CN60-10K also comes with an operator panel.
• Touch screen monitors (models CN60-10HT / CN60-10VT).
• USB 2.0 port, at the front, protected by a cover.
• Dimensions of CN60-10H / CN60-10HT (width × height × depth).
- 472 × 275 × 58.5 mm.
- 18.58" × 10.83" × 2.30".
• Dimensions of CN60-10V / CN60-10VT (width × height × depth).
- 329 × 393 × 58.5 mm.
- 12.95" × 15.47" × 2.30".
• Dimensions of CN60-10K (width x height x depth)
- 420 × 350 × 68 mm.
- 16.54" × 13.78" × 2.68".
System. • Processor: Atom Z510 1.1 GHz.
• Memory: 1 GB.
• Storage: Internal 2 GB CompactFlash.
• Storage expansion (optional): 2 GB Compact flash.
(additional storage space for user programs).
• RAM memory with battery.
LCD. • Type: TFT LCD.
• Size: 10.4" (aspect ratio 4:3).
• Resolution: 800 x 600 pixels.
Regulation. • CE.
Packaging. • The package meets the regulation EN 60068-2-32 procedure 1 with a
random fall from a height not greater than 1 m.
• Work temperature: The unit must not be running out of temperature range
between a maximum of 55 ºC (131 ºF) and a minimum 5 ºC (41 ºF).
• The temperature outside the enclosure where the unit is mounted must be
within the temperature range, between the maximum of 40 ºC (104 ºF) and
the minimum of 5 ºC (41 ºF).
• Ambient temperature: between -40 ºC (-40 ºF) and +70 ºC (158 ºF).
• Relative humidity: 20 ~ 85% RH without condensation.
• Pollution degree: 2
• Maximum work altitude: The unit must work properly at 2000 m according
to IEC 61131-2.
• Vibration test according to IEC 60068-2-6 with a frequency step of 1
octave/minute (±10%) and 10 sweeps long.
-
8.4 Hz

f

5 Hz; Constant movement with an amplitude peak of 3.5 mm.
- 150 Hz

f

8.4 Hz; Constant peak acceleration of 1g.
• Degree of protection: IP65 (front), IP20 (rear).
Power supply. • Universal DC power supply. Use a regulated 24 V DC power supply (between
-15% and +20%) and 2 A (including voltage ripple and noise). The power
supply must meet the UL1950 standard.
Connectivity. Monitor.
• 1 USB 2.0 port, accessible at the front, protected by a cover.
Central unit.
• 1 USB 2.0 ports
• 1 RS-232/422/485 (115 kbps) serial port (optional).
• 1 LAN RJ45 port for Ethernet 10/100/100 BaseT network.
• CAN Bus (CANfagor/CANopen).
• Sercos II bus.