Fagor CNC 8055 T Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 60

background image

This product uses the following source code, subject to the terms of the GPL license. The applications

busybox

V0.60.2;

dosfstools

V2.9;

linux-ftpd

V0.17;

ppp

V2.4.0;

utelnet

V0.1.1. The library

grx

V2.4.4. The linux kernel V2.4.4. The linux boot

ppcboot

V1.1.3. If you would like to have a CD copy of this source code sent to you, send 10 Euros to Fagor Automation

for shipping and handling.

All rights reserved. No par t of this documentation may be transmitted,
transcribed, stored in a backup device or translated into another language
without Fagor Automation’s consent. Unauthorized copying or distributing of this
software is prohibited.

The information described in this manual may be changed due to technical
modifications. Fagor Automation reserves the right to make any changes to the
contents of this manual without prior notice.

All the trade marks appearing in the manual belong to the corresponding owners.
The use of these marks by third parties for their own purpose could violate the
rights of the owners.

It is possible that CNC can execute more functions than those described in its
associated documentation; however, Fagor Automation does not guarantee the
validity of those applications. Therefore, except under the express permission
from Fagor Automation, any CNC application that is not described in the
documentation must be considered as "impossible". In any case, Fagor
Automation shall not be held responsible for any personal injuries or physical
damage caused or suffered by the CNC if it is used in any way other than as
explained in the related documentation.

The content of this manual and its validity for the product described here has been
verified. Even so, involuntary errors are possible, thus no absolute match is
guaranteed. Anyway, the contents of the manual is periodically checked making
and including the necessary corrections in a future edition. We appreciate your
suggestions for improvement.

The examples described in this manual are for learning purposes. Before using
them in industrial applications, they must be properly adapted making sure that
the safety regulations are fully met.

«
1
2
3
4
...
»

Содержание CNC 8055 T





























































Отзывы:

Нет отзывов

Похожие инструкции для CNC 8055 T

Бренд: D-Link Страницы: 6

Бренд: D-Link Страницы: 40

Бренд: MADRIX Страницы: 36

Бренд: TCS Basys Controls Страницы: 2

Бренд: Bang & Olufsen Страницы: 80

Бренд: Bang & Olufsen Страницы: 13

Бренд: CAME Страницы: 18

Бренд: CAME Страницы: 28

Бренд: CAME Страницы: 28

Бренд: CAME Страницы: 4

Бренд: CAME Страницы: 40

Бренд: CAME Страницы: 26

Бренд: CAME Страницы: 34

Бренд: CAME Страницы: 2

Бренд: fakro Страницы: 16

Бренд: e-BLEACH Страницы: 24

Бренд: Uniden Страницы: 28

Бренд: UniFocus Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды