Fagor 6H-880A TCX, Руководство пользователя

Страница: 21 / 58

e n g l i s h
19
1
Instruction manual
Important! Read the entire manual before using the oven. The documentation and accessories are
inside the oven.
The texts in the manual correspond to the numbered diagrams.
2
Installation
Using the oven
1.1 Unpacking. Remove all the protective
packaging elements.
1.2 Mains connection. Always take into account
the data on the reference plate (1.2.1) and
the measurements of the cabinet the oven
will be housed in (1.2.2, 1.2.3).
The appliance must be connected to the
mains with a fi xed single-phase connection
with the neutral-to-neutral (blue) connection
guaranteed (1.2.4). Fit the oven into the
space and centre it (1.2.5). Make sure there
is no excess cable in the upper part (1.2.6).
Screw it to the fi tting using the two screws
supplied (1.2.7).
Before using your new oven for the fi rst time,
heat it up while empty
(with no food in it and with the
control turned to
, for 30 minutes at 250ºC). It may
produce some smoke or a bad smell (this is normal and
is caused by the oven heating up grease residue etc.).
When it has cooled down, pre-clean it by wiping the
inside with a damp cloth.
You may browse the oven menu display and confi gure
it as you wish and/or use the different buttons for
cooking.
On/cancel. , Browse the different
menu options. Validate an option. Return to
previous display. Block oven keypad.
2.1 Accessories. Depending on the model, the oven
is equipped with a Standard Tray
(2.1.1), a
Deep Tray
(2.1.2) and a Standard Rack
(2.1.3), which function separately. You may also
combine any tray with the standard rack
(2.1.4) to form a unit. The half-removable rack
(2.1.5) and the fully-removable rack (2.1.6, 2.1.7)
support the trays or the unit (2.1.8). If your oven
has “Impulse” slide-out runners, fi rstly slide them
into the oven without the tray (2.1.9). The “Impulse”
runners will come out automatically due to the
weight of the tray when the oven is opened. Acc.
model to prevent this from happening, use the
locking system (2.1.10). You must use a tray under
the food with the “Impulse” runners (2.1.11). The
low temperature grill is required to use the “
low
temperature cooking ” mode (2.1.12). ake the
position of the racks into account when placing
them inside the oven. They have anti-overturn side
stops (2.1.13).
2.2 Accessory positions. The accessories
can be fi tted in 5 different positions
.
2.3 Selecting a language. When you switch on the
oven for the fi rst time or when the electricity returns
after a power cut, the language selection display
will appear. Press
or until the desired
language is highlighted and press to validate
(2.3.1).
2.4 Adjusting the time and date. After the language
has been validated, the date and time adjustment
display will appear (2.4.1). Press
or until
the Time appears (2.4.2). Validate by pressing
. The time will fl ash (2.4.3). Press or to
change the time (2.4.4). After adjusting the time,
press
to validate (2.4.5). Repeat the same
sequence to adjust the date and the 12/24 hour
mode. When all these items have been set, press
to validate (2.4.6).
Note: You may choose to view the clock in
analogue (2.4.7) or digital (2.4.8) mode.
2.5 Changing the language. Press . TAfter the
starting animation, the menu display will appear
(2.5.1). Press
, until Settings appears,
and press to validate (2.5.2). Press ,
to select the Language and press to validate
(2.5.3). Follow the sequence to change the
language (2.3.1).
2.6 Changing the time and date. Select Settings
and validate (2.5.1, 2.5.2). Press , to
select the Time / Date . Press to validate
(2.6.1). Follow the sequence to change the time
(2.4.1 - 2.4.6).
2.7 Beeper function. Press to access the menu
(2.5.1). Press , to select the Minute
minder. Press to validate (2.7.1). Press ,
to enter the time. Press to validate (2.7.2).
The time will start to count down and when it
reaches zero a beep will sound. Press
to stop
the beep.