fafnir UM-X Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 35

fafnir UM-X Скачать руководство пользователя страница 34

UM-X

Page 34/35

3

Operating instructions

Date: 02.2007

Measurement analysis system UM-... Ex

Mode of operation

The UM-... Ex measurement analysis system is used for the power supply, display
and limit monitoring of continuous filling level sensors with an interface of 4 to
20 mA. Alarms and faults are signalised visually using a light diode and on an LCD
(liquid crystal display) and audibly using an installed buzzer. The audible alarm
can be acknowledged using the external acknowledgement button or using the
QUIT key on the membrane keypad. The optical alarm remains on until the cause
of the alarm has been eliminated. External control units can be connected using
potential-free, change-over contacts.

Installation

Installation

Installation

Installation

Installation

Connecting the auxiliary power, the filling level sensor, the (optional)
acknowledgement button and the (optional) external control units must be
carried out in accordance with the wiring diagram. The maximum values for the
operating parameters mentioned on the wiring diagram must be observed.

Wiring work must only be performed when the equipment is disconnected from
the power supply. The special VDE regulations and the local installation regulations
must be observed.

Operating instructions

Operating instructions

Operating instructions

Operating instructions

Operating instructions

Before being put into service, all devices must be checked with respect to correct
connection and proper operation. The electrical power supply, including the
supply of the downstream devices, must be checked.

The general operating instructions for the devices being used must be observed.
The measuring transducer is maintenance-free.

«
...
32
33
34
35
»

Содержание UM-X




































Отзывы:

Нет отзывов