Page 4/5
Variable LPG Installation Kit
(6)
Mark this 1. position on the installation tube (1. Marking), see figure below:
(7)
Push the installation tube 10 mm up (safety distance to the tank bottom) and
mark this 2. position on the installation tube with a 2. Marking below the
1. Marking.
If the installation tube has no safety distance to the tank bottom, it may be
bent or damaged when tightened.
(8)
Turn the union nut of the cutting ring fitting at the 2nd. Marking hand-tight first.
(9)
Hold the fitting body and fix the cutting ring fitting with a 1 ¼ clockwise turn of
the union nut.
After the fixing, the cutting ring fitting can no longer be dismantled.
After tightening the cutting ring fitting the tank is sealed.
3.2
Shortening the Installation Tube (optional)
After installation, the installation tube should only protrude approx. 150 mm
above the flange. If it's longer, it can be shortened accordingly on site.
The sensor must be able to stand on the bottom of the installation tube.
1. Marking
1. Marking
2. Marking
1 ¼ turn
10 mm
