Faema X2 GRANDITALIA, Руководство пользователя

Страница: 31 / 100

English English
3.6 Dispensing of beverages - Hot water / steam
HOT WATER: GENERAL INSTRUCTIONS
Place the appropriate container under the hot water dispenser
(
14 )
Dispensing with automatic dosing
Press one of the hot water dispending keys ( 12 )
corresponding to the desired dose.
The programmed dose of hot water will pour from the
dispenser (
14 ) and will stop automatically.
N.B. Dispensing may be stopped by pressing the HOT WATER
STOP key (
35 ).
Pressing the HOT WATER STOP key ( 35 ) does not change
the parameters set during the programming phase.
STEAM: GENERAL INSTRUCTIONS
Fully immerse the steam dispenser tube ( 15 ) into the vessel
containing the beverage that needs to be heated.
Dispensing through the tap (13)
Turn the steam tap knob.
Wait until the beverage has reached the required temperature.
Stop the steam dispenser by turning the knob of the steam
tap in the opposite direction.
Note: At the conclusion of each steam dispensing phase,
clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully activate
steam dispensing at least once.
Dispensing with the Autosteam selector (13) (when provided)
Machines equipped with the AUTOSTEAM (STOP STEAM)
dispensing system have the "
stop steam dispensing when
set temperature is reached" function, and can rapidly heat
and froth milk.
Select the type of milk you desire:
- using the buttons
A (frothed) or B (hot);
- using the knob, clockwise (hot) or counter-clockwise
(frothed).
When the set temperature is reached, steam dispensing
can be stopped:
- automatically;
- manually, pressing buttons
A or B again, or turning the knob
in in any direction.
For more information on the function, please consult the
engineer's manual.
14
35
15
12
13
15
B
A
13
15
13