fadini FOX 724, Инструкция по эксплуатации и обслуживанию

Страница: 35 / 56

Pic. 33
Pic. 34
IMPORTANT: In installa ons with ONLY ONE
gearmotor, it is sufficient to connect the motor to
the M1 output (A1, B1, C1) and bridge B1 with B2,
leaving the terminals A2 and C2 free.
!
FOX 724 - 24 Vdc
FOX 730 - 230 Vac
br
own +
black -
(*)
blu
A2 B2 C2 A1 B1 C1
ELECTRICAL CONNECTIONS TO THE PROGRAMMER
The geared motor is supplied with the power supply cable, ground and encoder already assembled, all with a length of 2.5m.
FOX 724 and FOX 730 are supplied in a single version, to be installed either on the right or le side of the gate.
The electrical connec ons to the terminals from the ELPRO programmer iden fy the installed FOX on the Right or Le .
The FOX 724 24V geared motor already has an interface board inside for the electrical supply to the motor and encoder, so it is
sufficient to connect the 4 terminal wires of the provided cable to the respec ve terminals on the
ELPRO 42 programmer.
The FOX 730 230V geared motor already has the motor power supply cable wired internally, while the encoder is supplied externally
with its own cable. Both cables need to be connected to their respec ve terminals on the
ELPRO 43 programmer.
blu - c
omune
br
own - phase
black - phase
A en on:
Power Supply
230 Vac
Output
!
IMPORTANT: M2 engine (A2, B2, C2, D2, E2, F2) on
the delayed opening flap.
!
IMPORTANT: M1 engine (A1, B1, C1, D1, E1, F1) on
the 1st door leaf in opening and possibly the
pedestrian leaf.
(*) (*)
(*) (*)
!
(*) the engine is already grounded internally
!
ELPRO 42 ELPRO 42 ELPRO 43 ELPRO 43
encoder
3x0,5mm²
encoder
3x0,5mm²
engine 230 Vac
4x1,5mm² engine 230 Vac
4x1,5mm²
4x1,5mm² 4x1,5mm²
blu
br
own
black
blu
br
own +
black -
br
own +
black -
blu - c
ommun
br
own - phase
black - phase
B2 C2 A2 B2 C2
D2 E2 F2
A en on:
Power Supply
230 Vac
Output
!
FOX 724 - 24 Vdc FOX 724 - 24 Vac FOX 730 - 230 Vac FOX 730 - 230 Vac
blu
br
own
black
blu
A1 B1 C1 A1 B1 C1
D1 E1 F1
Left Right
GB
- 35
i
To execute the opening and closing programming, please refer to the instruc ons ELPRO 42 and ELPRO 43.
FOX 724 | FOX 730