fadini Elpro S20, Руководство пользователя

Страница: 12 / 40

ELECTRICAL POWER CONNECTIONS
Accessory Electrical connections Dip-switch setting and LED indication of functions
12
Signal led lights:
Output for intermittent signal led
lights during the movement both
rising and lowering and also on
dwell in up position: the lights are
off only when the bollard is in down
position.
Connect the
blue-common wire
and the brown wire of the bollard
flashing light cable.
Signal led lights output
230 V - 100 W max
BLUE
COMMON
BROWN
52 51 53
Acoustic signal “beeper”
during movement:
PCB power supply:
The acoustic signal device inside
the bollard is active duringrising
and lowering. The connection wires
are the
blue-common and the
black one of the flashing light
cable.
Acoustic signal device
230 V - 100 W max
PCB power supply
230
V ±10% 50 Hz single phase
BLUE
COMMON
BLACK
LIVE
F N
N
EUTRAL
52 51 53
Electronic programmer power
supply.
23 22 24 25
External flashing lamp:
It is possible to connect both the
external
flashing lamp and the
intermittent signal led lights which
are on only during the rising and
lowering movement. The cable for
the connection is the one labelled
as flashing lights cable.
l'apricanc
ello
230 V - 100 W max
COMMON
52 51 53
ON : pre-flashing
OFF : no pre-flashing
DIP-SWIT CH N° 4 and N° 10:
4
ON : flashing light out of service on dwell time.
Automatic mode
OFF : light flashes on dwell time. Automatic mode
10
GB
Elpro S20
ELECTRONIC CONTROLLER UP TO 2 AUTOMATIC BOLLARDS,
WITH OR WITHOUT LIMIT SWITCH