![background image](http://html1.mh-extra.com/html/fadini/drive-700/drive-700_installation-manual_3187142012.webp)
Via Mantova, 177/A - 37053 Cerea (Verona) Italy - Tel. +39 0442 330422 r.a. - Fax +39 0442 331054 - e-mail: [email protected] - www.fadini.net
®
INSTALLATION MANUAL
The manufacturers reserve the right to change the products without any previous
notice and are not liable for possible damages to people and properties.
Distributor’s box
The growth of MECCANICA FADINI has always been based on the
development of guaranteed products thanks to our “TOTAL QUALITY
CONTROL” system which ensures constant quality standards,
updated knowledge of the European Standards and compliance
with their requirements, in view of an ever increasing process of
improvement.
EUROPEAN MARK CERTIFYING CONFORMITY TO
THE ESSENTIAL REQUIREMENTS OF THE
STANDARDS 98/37/EC
• DECLARATION OF CONFORMITY
• GENERAL WARNINGS
• EN 12453, EN 12445 STANDARDS
• CEI EN 60204-1 STANDARDS
• WARRANTY CERTIFICATE
155
150
150
150
38
356
40
40
344
136
324
160
116
10
10
12
156
156
460
140
50
65
165
230
230
230
460
OIL-HYDRAULIC JACK
Rotation angle ............................................................110
°
/175
°
Rotation time 110
°
...............................................................23 s
Rotation time 175
°
...............................................................28 s
Max. rated torque ..........................................................235Nm
Piston diametre ................................................................75mm
Piston stroke.....................................................................52mm
Working temperature.........................................-20
°
C - +80
°
C
Oil volume.......................................................................0,25dm
3
Static gate weight ..........................................................700Kg
PERFORMANCE
Duty cycle: ............23 s Opening - 30 s Dwell - 23 s Closing
Time of one complete cycle:...............................................76s
No. of complete cycles Opening-Stop-Closing .......47/Hour
137
.
000 cycles per year, 8 hours’ service per day
CHECKING AND MAINTENANCE:
To achieve an optimum performance and longer life of the equipment and in observance of the safety regulations, it is
recommended that inspections and proper maintenance are made by qualified technicians to the whole installation ie, both
the mechanical and electronic parts, as well as wiring:
- Mechanical parts: maintenance every 6 months approx.
- Eletronic apparatus and safety equipment: maintenance every month.
110
°
DRIVE 700 OVERALL DIMENSIONS
TECHNICAL SPECIFICATIONS
ELECTRIC MOTOR
Power Yield...................................................................0.24KW (0.33HP)
Supply voltage...................................................................................230V
Frequency ..........................................................................................50Hz
Absorbed current .................................................................................2A
Absorbed power.............................................................................400 W
Capacitor........................................................................................12.5
µ
F
Motor rotation speed............................................................1
.
350 r.p.m.
Intermittent service............................................................................. S3
OIL-HYDRAULIC MOTOR/PUMP UNIT
Pump flow rate P3................................................................0.85
l
/1 min.
Average working pressure............................................1MPa (10bars)
Max. pump pressure.......................................................3MPa (30bars)
Oil type ...........................................................OIL FADINI A 15 BY AGIP
Tank capacity ..............................................................................0.95 dm
3
Static weight ......................................................................................8 Kg
Working temperature .......................................................-20
°
C - +80
°
C
Protection standards .....................................................................IP 673
AUTOMATIC GATE MANUFACTURERS
®
s.n.c.
Made in Italy
®
GB
9-2004