fadini BAYT 980, Инструкция по эксплуатации

Страница: 8 / 24

In installations in which the folding leg is required, it is
necessary to insert in the specific slot in the bottom of the
R532 barrier beam a 15 cm rubber profile (so as to cushion
the shock in the opening phase of the barrier beam) and
then the folding leg, by way of its specific attachment. Then
tighten everything with the setscrew (Pic. 12).
In the event that a fence is to be installed, it is also
necessary to attach the coupling plate between the leg
and the fence by means of nuts and bolts (Pic. 13).
15 cm rubber
profile
Barrier beam cap
Setscrew
Coupling plate
Folding leg
R532
R532
8
ATTACHMENT OF THE BAYT 980 FOLDING LEG
INSTALLATION OF COUNTERWEIGHTS ON THE BAYT 980
In Bayt 980 installations with beams that are 6,40 metres in length or longer and fittted with a fence, it is necessary to also attach
counterweights by means of nuts, bolts and a support bracket (Pic. 14).
See the summary table of the possible applications (Pic. 32, page 18).
English
BAYT 980
Pic. 13 Pic. 12
Pic. 14
R532 aluminium
barrier beam
4,20 metres
5,30 metres
6,40 metres
7,40 metres
8,50 metres
R532 barrier beam
with aluminium fencing
3,80 metres
4,75 metres
5,89 metres
6,84 metres
7,98 metres
1
2
3
4
R533 reinforcement arm - 3,0 metres
Galvanised M8 nut
R532 anodised
aluminium beam
Barrier beam cap
Folding leg
8x65 TE galvanised screws
Barrier beam cap
Nuts
Counterweights
(10 kg each)
Attachment bolts
Counterweight
attachment support
Aluminium fencing
STANDARD MODULES
D = 2,09 m
E = 1,71 m
F = 0,57 m
oil-hydraulic barrier