fadini BAYT 980, Инструкция по эксплуатации

Страница: 5 / 24

INSTALLATION OF THE FIXED PEDESTAL WITH BEAM CATCHER
With the installation of the fixed pedestal with beam catcher, it is necessary to lay down a service conduit between the barrier and
the fixed pedestal for the passage of the electrical cables of the photocells or a possible magnetic lock (optional) to secure the
aluminium barrier beam; this operation must be performed after having set the Bayt 980 foundation plate, where the edge lines
of the barrier housing cabinet and fixed pedestal base plate respectively must be perfectly aligned
(Pic. 6).
FIXING THE HOUSING CABINET
Once satisfied the anchor plate has firmly set into the ground (it is necessary to wait until the concrete has hardened), the Bayt 980
housing cabinet can be mounted onto it and then the four M14 hexagonal nuts can be securely tightened with their respective
washers (onto the anchor bolts protruding from the base of the cabinet) as illustrated in Pic. 5.
5
English
BAYT 980
Pic. 5
Pic. 6
!
Important: at the time the housing cabinet is mounted on top of the anchor base plate, make
sure that the electric cable conduits be inserted as well into the two holes in the housing cabinet
base.
Align the edge lines of the barrier housing and pedestal base plat
e
Ø 50
Ø 50
Ø 30
Ø 30
!
Insert the conduit inside of the cabinet
passing through the two holes in the
anchor base plate
Tighten the four M14 hexagonal nuts
with the washers supplied with the equipment
Derivation well
oil-hydraulic barrier