3
2
PIC. 1
CUTAWAY VIEW OF THE ELECTRIC MOTOR ASSEMBLY
AND HYDRAULIC JACK
AVAILABLE TYPES: NON LOCKING - LOCKING - WITH FLOW REGULATOR
TWO-WAY LOCKING
VALVE ASSEMBLY
APROLI
280
BATT
INSTRUCTIONS FOR THE INSTALLATION OF APROLI 280 BATT TO SWINGING
DOUBLE GATES WITH VERY LARGE PILLARS
PIC. 2
First loosen the fastening screws to remove the cover. To do this, open the hinged door with the supplied key; one of the two fastening
screws is there. After the removal of the cover, the electro-hydraulic assembly is fully exposed, ie. “electric motor/hydraulic jack” fitted
with the pressure safety valves that control the thrust/pushing power of the operator and the emergency release in events like power
failure. It also includes a bracket, designed to provide fixing facility to a wall or pillar and a suitable outlet for the cables; an articulated
arm, adjustable to meet the most various distance requirements on site applications; and a shoe bracket to be fixed to the gate. The
operator is supplied already pre-filled with special oil to suit both high and low environment temperatures. It allows the correct
performance of APROLI 280 BATT within a temperature range from –20
°
C to +80
°
C. APROLI 280 BATT is produced and tested in the
workshops of MECCANICA FADINI which guarantees the long lasting reliability of this product in time.
it is recommended to follow these instructions to achieve a perfect application of the operator.
PRESSURE SAFETY
VALVE “CLOSE”
GREEN
PRESSURE SAFETY
VALVE “OPEN”
RED
OIL RESERVOIR
TERMINAL PLUG
COVER
TERMINAL PLUG
EARTH WIRE
OIL RESERVOIR
REAR CAP
0.25 HP
ELECTRIC MOTOR
HYDRAULIC LOBE
PUMP
JACK END CAP
1
st
PISTON
RACK
RELEASE LEVER
PISTON LINER
SHAFT SUPPORT
SQUARE INDENTED
SHAFT
2
nd
PISTON
PISTON LINER
MAIN ASSEMBLY
BLOCK WITH MOTOR
AND HYDR. JACK
“B”
“C” “A”
BASE AND
FIXING BRACKET
STUD
BOLT
ASSEMBLY ELEC.
MOTOR HYDR. JACK
PROTECTION
COVER
FIXING
SCREWS
OPEN STOP ASSEMBLY
14 E22 NUT, STUD BOLT,
ADJUSTER COVER.
LEFT-HAND WASHER Ø 8.5
8M E13 NUT
RETAINING
GRUB SCREW
DRIVING
BENDED
ARM
BENDED ARM
PLUG PROFILE
BOLT AND
NUT
STRAIGHT
ARM COVER
STRAIGHT
ARM.
ADJUSTABLE
FIXING
SHOE
SCREW FOR
ADJUSTMENT
BUSH
ARTICULATED ARM
LEFT-HANDED
Lh
