EN
INSTALLATION MANUAL AND INSTRUCTIONS FOR USE
21
Ejemplo:
The device turns on first. By pressing the [+] button 4 times, the desired tem
-
perature is set to a value of 55 ° C (the first 4 LEDs on the left start flashing).
The radiator begins to heat up. When the radiator temperature reaches
40 ° C, the first LED (blue) stops flashing and stays on.
After a while the temperature reaches 45 ° C and the second LED
(green) also stops flashing and stays on.
The same behavior applies to the two subsequent (yellow) LEDs, until
the desired temperature of 55 ° C is reached (all LEDs stop flashing).
“Standby / antifreeze” mode:
In this mode, the device goes into standby, however, as soon as the radiator temperature drops
below 10 ° C, the heating element turns on automatically.
“Boost” mode:
Press the [Boost / Timer] button to activate this operating mode.
This mode activates the heating element at maximum power for 2 hours (for safety reasons, the
maximum temperature is limited to 65 ° C).
To exit the “Boost” mode, press the [Boost / timer] button.
Indication of the “Boost” mode: the “Boost / Timer” LED is red and flashes.
“Timer24” mode:
Press the [Boost / Timer] button for 3 seconds to activate this mode.
The control system activates the “Boost” mode for 2 hours, after that it returns to the “Comfort”
mode and after 22 hours, the “Boost” mode starts again for 2 hours. This sequence will repeat itself
endlessly.
To exit the “Timer24” mode, press the [Boost / Timer] button.
NOTE: During the first cycle, the duration of the “Comfort” mode is 21 hours.
Indication of “Timer24” for 2 hours “Boost”: the “Boost / Timer” LED flashes green.
For 22 hours “Comfort”: LED “Boost / Timer” permanent green.
“Timer12” mode:
Press the [Boost / Timer] button for more than 5 seconds to activate it.
The control system activates the “Boost” mode for 2 hours, after that it returns to the “Comfort”
mode and after 10 hours, the “Boost” mode starts again for 2 hours. This sequence will repeat itself
endlessly.
To exit “Timer12” mode, press the [Boost / Timer] button.
NOTE: During the first cycle, the duration of the “Comfort” mode is 9 hours.
Indication of “Timer12” for 2 hours “Boost”: “Boost / Timer” LED flashing amber.
For 10 hours “Comfort”: Permanent amber “Boost / Timer” LED.
