www.factorelectronics.com
V-66 INSTALLATION INSTRUCTIONS RS-232 CONTROL
INSTALLATION:
V-66 RS-232 Serial Port Control
The V-66 RS-232 Serial commands continued.
hh: Balance control status
ii: Source control status
jj: keypad connecting status
(00:disconnect 01:connected)
Inquiry command structure (2) ?xxPP'CR'
xx: stands for control object code
10 : All Zone of Main unit 1.
20 : All Zone of Main unit 2.
30 : All Zone of Main unit 3.
11 : Zone1 of Main unit 1
12 : Zone2 of Main unit 1
13 : Zone3 of Main unit 1
14 : Zone4 of Main unit 1
15 : Zone5 of Main unit 1
16 : Zone6 of Main unit 1
PP: Stands for control action code.
PA: PA control
PR: Power control
MU: Mute control
DT: DT control
VO: Volume control
TR: Treble control
BS: Bass control
BL: Balance control
CH: Source control
LS: keypad connecting status
Reply command: >xxPPuu'CR'
Key in 1<********'CR' change Source 1 Name
display;********needs to be 8 valid ASCII codes.
Key in 2<********'CR' change Source 2 Name
display
Key in 3<********'CR' change Source 3 Name
display
Key in 4<********'CR' change Source 4 Name
display
Key in 5<********'CR' change Source 5 Name
display
Key in 6<********'CR' change Source 6 Name
display
Key in M<********'CR' change the name display on
keypad when turn on.
Key in <9600'CR' change RS232 speed rate to 9600
Key in <19200'CR' change RS232 speed rate to
19200
Key in <38400'CR' change RS232 speed rate to
38400
Key in <57600'CR' change RS232 speed rate to
57600
Key in <115200'CR' change RS232 speed rate to
115200
Key in <230400'CR' change RS232 speed rate to
230400
When unplugging and re-plugging the AC power
cord,
the baud speed rate returns to 9600.
ee: Volume control status
ff: Treble control status
gg: Bass control status
hh: Balance control status
ii: Source control status
jj: keypad connect status
(
Baud Rate 9600, 8, N, 1 , DB9 Connector Pin out, Tx, Rx, GND)
