www.factorelectronics.com
V-66 INSTALLATION INSTRUCTIONS PRE-AMP OUTPUTS
INSTALLATION:
Using The
V-66 PRE-AMP OUTPUTS
The V-66 provides 6 x stereo unbalanced line level PRE-AMP outputs which correspond to the 6 x zone outputs. PRE-AMP outputs can
be used to connect powered subwoofers to a zone or additional amplifiers to expand the available power in a large zone or multiple zones.
The V-66 can also be used as the master controller in large commercial audio systems where constant voltage 25/70V amplifiers can
be connected to the PRE-AMP outputs. The PRE-AMP output levels are variable and can be controlled from the V-66-KP keypad,
infrared or RS232. Keep the PRE-AMP output cable runs under 25 feet to avoid RF interference and use good quality shielded RCA cables.
4-8 ohm speakers
Powered Subwoofer
Stereo mode
70 volt speakers
