13
Appendix 1 - Configuring the Safe-Air Tester
From the main menu press the configure icon.
In the configuration sub menu there are 3 icons
available, from left to right these are:
Set Date
Set Time (the instrument uses a 24 hour clock)
Set units of measure and test standard
The date and time are set prior to the unit being
supplied but they can be adjusted as necessary.
To select the units of measure and test standard
press the right hand icon.
In this menu you can then choose date format;
pressure and temperature units of measure and
the breathing-air test standard.
Once you have made your selection press the
arrow in the top right corner to exit. To then exit
from the configuration sub menu to the main
menu press the arrow at the top left of the screen.
