Facom CL2.BA19 809184, Инструкция по эксплуатации

Страница: 6 / 34

6
EN
Preserving the charger’s power supply:
- Do not carry the charger by its power supply cable, and do not pull the cable to remove the mains plug.
- Preserve the cable from heat, hot, cutting or abrasive objects, and chemicals.
- Do not modify the mains plug.
- Inspect the cable and plug before each use.
Protect the batteries and handle them with care:
- Never use faulty or distorted batteries.
- Never expose the batteries to fire.
- Store your machine and your batteries in a location where the temperature is below 40°C.
- Do not open the batteries.
- Fluid can leak from a damaged accumulator: never touch this fluid. In case of contact, perform a long rinse with water; in case
of a contact with the eyes, call a doctor.
- Never touch nor short-circuit the contacts.
- Never place a metallic object close to the contacts: risk of burn or fire.
Never damage the charger:
- Do not insert foreign bodies into the charger’s ventilation slots.
- Do not leave the charger connected permanently; it must cool down between 2 charges.
- Observe the temperatures of use of the charger.
- Charge your battery in a dry and ventilated location, the ideal temperature is between 0°C and 45°C.
Technical specifications
It automatically regulates when the accumulator is charged, preventing any damage if the set is left powered on after the
required charging time.
Note: the CL2.CH919 universal charger is compatible with all of FACOM electrically powered tools ( CL.P1413D , CL.C1913D ).
Battery CL2.BA19
Type LITHIUM-ION
Nominale voltage 19,2 V
Capacity 3 Ah
Weight (battery alone) 0,77 kg
Charger CL2.CH1419
Charge capacity 14,4 to 19,2 V
DC
- 3 Ah
Temperature of use between 0˚C and 45˚C
Dimensions (charger only) 210 x 111 x 60 mm
Weight (charger alone) 0,6 kg
1 : batterie charge test
2 : charge and alarm indicators
3 : LED - Light Emitting Diode
4 : LED light switch
5 : charger terminals
3
4
2
1
5
100 - 240 V
AC
50-60 Hz
75 W