Fac HR 100, Руководство по эксплуатации и обслуживанию

Страница: 9 / 24

7
EN
1
.1 - UNPACKING
On delivery of the hamburger press,
check that the packaging is integral. If
this is not the case, inform the carrier or
area agent immediately.
Operate as follows to remove the pack-
aging from the hamburger press:
• Cut and remove the plastic bands.
• Open the box and take out the
instruction booklet.
• Proceed as described hereafter.
- Remove the safeguards (carton
and polyurethane foam) inside
the box.
- Lift the machine with great care
and place on a solid surface.
- Remove the transparent bag
wrapping the hamburger press.
Check that all components
specified in the delivery note
and this instruction booklet are
present and fully intact.
• Should any faults be noted, such as:
- dents to the frame or guards;
- controls that are either not working
or broken;
- missing items or other problems;
please advise the courier,
manufacturer and service centre
immediately.
- Carefully dispose of packaging com-
ponents (bands, cardboard, poly-
styrene, polythene bags, etc.) as
reported below and in accordance
with the standards of the Country of
use.
PACKING
This product complied with Directive 2012/19/UE.
The crossed out wheeled bin symbol on equipment indicates that it must be treated separately
from household waste at the end of its working life and therefore taken to a recycling facility for
electrical and electronic equipment or handed over to the reseller when purchasing new equipment
of the same type.
The user is responsible for consigning the equipment to appropriate collection facilities at the end
of its working life or face the penalties provided for by current waste management legislation.
Separate collection for subsequent delivery of waste equipment to environmentally-compatible
recycling, treatment and disposal facilities to prevent possible negative impacts on the environment
and human health whilst encouraging recycling of the product’s components.
For further information regarding the available collection facilities, please contact your local refuse
collection service or the shop in which the purchase was made.
Manufacturers and/or importers fulfil their obligations concerning environmentally-compatible
recycling, treatment and disposal either directly or by joining a collective scheme.
GUIDE TO THE TREATMENT OF WASTE EQUIPMENT