FabiaTech FX5503 страница 29 Скачать руководство пользователя | Manualshive

Страница: 29 / 62

background image

FabIATech Corporation

24

Boot Up Num-lock

This field is used to activate the Num Lock function upon system boot. If the setting
is on, after a boot, the Num Lock light is lit, and user can use the number key.

Available options: On, Off

Default setting: On

Floppy Drive Swap

The field reverses the drive letter assignments of your floppy disk drives in the Swap

A, B setting, otherwise leave on the default setting of Disabled (No Swap). This
works separately from the BIOS Features floppy disk swap feature. It is functionally
the same as physically interchanging the connectors of the floppy disk drives.

When the function’s setting is <Enabled>, the BIOS swapped floppy drive
assignments so that Drive A becomes Drive B, and Drive B becomes Drive A under
DOS.

Available options: Disabled, Enabled

Default setting: Disabled

Floppy Drive Seek

This field is used to set if the BIOS will seek the floppy <A> drive upon boot.

Available Options: Disabled, Enabled

Default setting: Disabled

PS/2 Mouse Support

The setting of Enabled allows the system to detect a PS/2 mouse on boot up. If
detected, IRQ12 will be used for the PS/2 mouse. IRQ 12 will be reserved for

expansion cards if a PS/2 mouse is not detected. Disabled will reserve IRQ12 for
expansion cards and therefore the PS/2 mouse will not function.

Available options: Disabled, Enabled

Default setting: Enable

System Keyboard

This field specifies if an error message should be prompted when a keyboard is not
attached.

Available options: Absent, Present

«
...
27
28
29
30
31
...
»

Содержание FX5503































































Отзывы:

Нет отзывов

Похожие инструкции для FX5503

Бренд: IBM Страницы: 170

Бренд: IBM Страницы: 257

Бренд: IBM Страницы: 63

TRS-80 Model 100

Бренд: Radio Shack Страницы: 210

EPC-C301 Series

Бренд: Advantech Страницы: 80

Бренд: VISIONARY DESIGNS Страницы: 2

Бренд: UUGear Страницы: 25

Бренд: Asus Страницы: 2

Бренд: Dell Страницы: 57

Бренд: Dell Страницы: 57

Бренд: Cincoze Страницы: 107

Бренд: Ciara Страницы: 71

Бренд: Corsair Страницы: 16

QBiX2-Pro-APLB4200H-A1

Бренд: GIGAIPC Страницы: 73

ZBOX nano VDO1 PLUS

Бренд: Zotac Страницы: 30

Бренд: Shuttle Страницы: 26

Бренд: Janz Tec Страницы: 17

Бренд: Portus Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды