background image

 ii

Copyright 

©Copyright 2002FabIATech Corporation, The content of this publication may not 
be reproduced in any part or as a whole, transcribed, stored in a retrieval system, 

translated into any language, or transcribed in any form or by any means, 

electronic, mechanical, and magnetic… or otherwise without the prior written 
permission of FabIATech Corporation. 

Disclaimer 

FabIATech makes no representation of warranties with respect to the contents of 
this publication.  In an effort to continuously improve the product and add features, 

FabIATech reserves the right to revise the publication or change specifications 

contained in it from time to time without prior notice of any kind from time to time. 

FabIATech shall not be reliable for technical or editorial errors or omissions, which 

may occur in this document.  FabIATech shall not be reliable for any indirect, 

special, incidental or consequential damages resulting from the furnishing, 
performance, or use of this document. 

Trademarks 

Trademarks, brand names and products names mentioned in this publication are 

used for identification purpose only and are the properties of their respective 

owners. 

Technical Support 

If you have problems or difficulties in using the system or setting up the relevant 

devices, and software that are not explained in this manual, please contact our 
service engineer for service, or send email to 

[email protected]

Returning Your Board For Service & Technical Support  

If your board requires servicing, contact the dealer from whom you purchased the 
product for service information. You can help assure efficient servicing of your 

product by following these guidelines: 

A list of your name, address, telephone, facsimile number, or email address 
where you may be reached during the day 

Description of you peripheral attachments  

Description of your software (operating system, version, application 
software, etc.) and BIOS configuration 

Description of the symptoms (Extract wording any message) 

For updated BIOS, drivers, manuals, or product information, please visit us at 

www.fabiatech.com

 

Содержание FX5401


































































Отзывы: