FabiaTech FX5401 Скачать руководство пользователя страница 10

Страница: 10 / 65

FabIATech Corporation

Packing List

Upon receiving the package, verify the following things. Should any of the

mentioned happens, contact us for immediate service.

•

Unpack and inspect the FX5401 package for possible damage that may

occur during the delivery process.

•

Verify the accessories in the package according to the packing list and see
if there is anything missing or incorrect package is included.

•

If the cable(s) you use to install the FX5401 is not supplied from us, please

make sure the specification of the cable(s) is compatible with the FX5401
system.

Note: after you install the FX5401, it is recommended that you keep the diskette or

CD that contains drivers and document files, and keep the document

copies, or unused cables in the carton for future use.

The following lists the accessories that may be included in your FX5401 package.

Some accessories are optional items that are only shipped upon order.

•

One FX5401 embedded system.

•

One AC to DC24V power adapter and 1 AC power code.

•

One 2.5" HDD clamp holder accessory pack.

•

One Y-type (3-terminal) PS/2 keyboard plus mouse port adapter cable.

(Optional)

•

L-type universal fixers and 6 screws.

•

6 stamp pads for this enclosure.

•

One compact disc includes software utility.

Содержание FX5401


































































Результаты поиска

Содержание FX5401

Отзывы:

Похожие инструкции для FX5401

Бренды по названию

Популярные бренды

FabiaTech FX5401, Руководство пользователя

Результаты поиска

Содержание FX5401

Отзывы:

Похожие инструкции для FX5401

Бренды по названию

Популярные бренды