FabiaTech FB2631 Скачать руководство пользователя страница 9

Страница: 9 / 89

FabiaTech Corporation

Specifications

VIA Eden (V4) 1GHz and 128KB or above L2 cache inside the CPUs.

Supporting One 200 pin So-DIMM socket for up to 1GB DDR2-400/533 RAM.

Two Realtek 8110SC chipset 10M/100/1000M Ethernet with RJ-45 ports.

CX700M supports CRT /LVDS/TV interface use UMA VRAM up to 128MB.

Supports one RS-232 and one RS232/RS422/RS485 ports.

Four USB V2.0 ports and one PATA IDE and two SATA interface

Compact Flash socket for 3.3V Compact Flash and Micro Drives.

PS/2 compatible keyboard and mouse interface.

Four TTL input lines and four TTL out lines.

Providing speaker and hard disk access LED.

Software programmable watchdog timer.

Providing one HD Codec audio function.

Flash BIOS with easy upgrade utility.

Expansion PCI/104 Bus

Power requirement: +5V only, 3.2A maximum (1GHz CPU).

3.5” disk size,145mmx102mm (5.7” x 4.0”)

Содержание FB2631


























































































Результаты поиска

Содержание FB2631

Отзывы:

Бренды по названию

Популярные бренды

FabiaTech FB2631, Руководство пользователя

Результаты поиска

Содержание FB2631

Отзывы:

Бренды по названию

Популярные бренды