FabiaTech FB2631 Скачать руководство пользователя страница 44

Страница: 44 / 89

FabiaTech Corporation

Standby Time Out

This field specifies the length of a period of system inactivity (like hard disk or video)
while in full power on state. When this length of time expires, the system enters

Standby power state.

Available Options: Disabled, 1 Minute, 2 Minute, 4 Minute, and 8 Minute, up to 60
Minute.

Default setting: Disabled

Suspend Time Out

This field specifies the length of time the system waits before it enters suspend

mode.

Available Options: Disabled, 1 Minute, 2 Minute, 4 Minute, and 8 Minute, up to 60
Minute.

Default setting: Disabled

Hard Disk Time Out (Minute)

This option specifies the amount of time the hard disk drive can be inactive before

the computer enters a power-conserving state specified in the Hard Disk Drive
Power Down Mode option.

Available Options: Disabled, 1 Minute, 2 Minute, and 3 Minute, up to 15 Minute.

Default setting: Disabled

Green PC Monitor Power State

This option specifies the power state that the green PC-compliant video monitor

enters when the BIOS places it in a power saving state after the specified period of
display inactivity has expired.

Available Options: Standby, Suspend, and Off

Default setting: Off

Video Power Down Mode

This field specifies the power conserving state that video subsystem enters after the

specified period of display inactivity has expired.

Available Options: Disabled, Standby, Suspend

Default setting: Disabled

Содержание FB2631


























































































Результаты поиска

Содержание FB2631

Отзывы:

Бренды по названию

Популярные бренды

FabiaTech FB2631, Руководство пользователя

Результаты поиска

Содержание FB2631

Отзывы:

Бренды по названию

Популярные бренды