manualshive.com logo in svg

FabiaTech FB2631, Руководство пользователя

Поделиться
Скачать
FabiaTech FB2631 Скачать руководство пользователя страница 57

FabiaTech Corporation 

 

51 

5.

 

Select System or Setup.   

—

 

Always: a visitor who attempts to enter BIOS or operating system will be 
prompted for password.   

—

 

Setup: a visitor who attempts to the operating system will be prompted for user 

password.  You can enter either User password or Supervisor password. 

6.

 

Point to Save Settings and Exit and press Enter. 

7.

 

Press Y when you see the message, “Save Current Settings and Exit (Y/N)?” 

‹

 

Clear User Password  

Select Clear User Password from the Security Setup menu and press <Enter>. 

Clear New Password > [Ok] [Cancel] appears. Type the password and press 

<Enter>. The screen does not display the characters entered. Retype the password 
as prompted and press <Enter>. 

‹

 

Password Check 

This field enables password checking every time the computer is powered on or 
every time the BIOS Setup is executed.  If Always is chosen, a user password 

prompt appears every time and the BIOS Setup Program executes and the 

computer is turned on.  If Setup is chosen, the password prompt appears if the BIOS 
executed. 

Available options: Setup, Always 

Default setting: Setup 

‹

 

Boot Sector Virus Protection 

This option is near the bottom of the Security Setup screen. The Optimal and Fail-

Safe default setting is Disabled 
 

Enable: Set this value to prevent the Boot Sector Virus Protection. This is the default 

setting. 

Disable: Select Enabled to enable boot sector protection, displays a warning when 

any program (or virus) issues a Disk Format command or attempts to write to the 
boot sector of the hard disk drive. If enabled, the following appears when a write is 

attempted to the boot sector. You may have to type N several times to prevent 

the boot sector write. Boot Sector Write! 

Possible VIRUS: Continue (Y/N)? _ 

The following appears after any attempt to format any cylinder, head, or sector of 

any hard disk drive via the BIOS INT 13 Hard disk drive Service: 
Format!!! 

Possible VIRUS: Continue (Y/N)? 

Note: it is suggested that you write down the password in a safe place to avoid 

that password may be forgotten or missing. 

Содержание FB2631


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды