Faber Relaxed Premium XL, Руководство пользователя

Страница: 11 / 22

Installation Instructions
10 < < < <
If one or both points are not acceptable then
check:

The log set layout and/or the amount of
chips on the burner.

The pipe connections for leaks (in case of
blue flames).

Whether the correct Restrictor is fitted.

The outlet.
o
Wall terminal right side up
o
Roof terminal on the right
position
o
If the maximum horizontal flue
lengths is not exceeded.
7.5 Flue gas analyzer
If you are in possession of a CO/CO2 flue gas
analyzer, then it is possible to check the supply air
and the combustion gases.
There are two measuring pipes at the front of the
fire between the mounting frame and the glass
(Fig. 3.3 A and B).
The ratio CO2 and CO must not be greater than
1:100
Example:
CO2 is 4% and CO is 400ppm, measured at the
highest point
If the ratio is greater than 1:100 or exhaust gases
are measured in the supply air, then also check
above points.
8 Instructions for client

Recommend that the unit should be
checked annually by a qualified specialist
to ensure the safe use and to guarantee a
long service life.

Give advice and instructions on care and
cleaning of the glass. Highlight the danger
of burnt ‐ in fingerprints.

Instruct the customer on the operation of
the unit and the remote control, including
replacing the batteries and setting the
receiver.

Handover to customer:
o
Installation instructions
o
User manual
o
ITC operating instructions
o
Log set instruction card
o
Suction Cups
o
Magnetic snapper
9 Annual maintenance
9.1 Checking and cleaning:

Check and clean if necessary after
verification:
o
The pilot light
o
The burner; for LPG flat
burner the ceramic burner
top.
o
The combustion chamber
o
The glass
o
The logs for breakage.
o
The outlet.

Replace, if necessary:
o
Chips/Embers/ Glow wire
9.2 Cleaning the glass
Most deposits can be removed with a dry cloth.
Clean the glass with a ceramic hob cleaner.

Please note:
Avoid fingerprints on the glass. These are no longer
removable after they are burnt in!
Now carry out check ‐ up as described in Chapter 7
“Checking after installation”.
10 Conversion to other gas type
The conversion to a different gas type may only be
performed by a qualified installer/dealer.
10.1 Conversion from natural gas to
propane (or vice versa)
This can only be done by replacing the burner. To
do so, please contact your dealer.
Specify with your order always the type and serial
number of the device.
11 Flue calculation
A simple way to calculate whether the exhaust
configuration is possible in combination with your
fire, use the free “Faber Flue App” and download
from:
INTERNET:
BlackBerry, Android, PC (with Google Chrome
browser)
APP store:
iPhone, iPad and Mac.
Google Play:
Android smartphones and Android tablets.