Faber HAAKON, Руководство по сборке и эксплуатации

Страница: 10 / 24

10
Complaints can only be accepted when all the following data is available:
-
Production number (see item)
-
Purchase proof or copy of the purchase receipt from the Faber authorised
dealer
-
Acceptance record from the chimney sweep
-
In the case of malfunction, the acceptance record from the print-out device
of the chimney sweep and the chimney calculation according to DIN 4705
Your dealer (or your contractor) can only accept the guarantee if the stove has
been used according to the respective operating instructions. The guarantee
only applies to the country in which Faber first sold the product and applies only
to the original buyer, i.e. it is not transferable. On the bill, the day of delivery
must be indicated.
In the case of improper handling, failure to comply with the operating
instructions or the use of force, all guarantee claims are void.
Enamel and paint damage are only covered by the guarantee if they are
immediately notified in writing to the dealer on delivery of the stove.
Any transport damage is not covered by the guarantee (this must be claimed
against the carrier in accordance with the terms of the carrier).
For further information on the guarantee, please see the information and notes
in the respective chapter of these operating instructions.
IMPORTANT :
Damage and defects caused by inadequate maintenance and cleaning and
through improper interference, repair work or attempts at repair by
unauthorised persons, and damage and defects resulting from changes or
disassembly of the stove, where component parts or the flue pipe (chimney,
stove pipe, etc.) and replaced parts or materials do not correspond to the
original specifications, are excluded from the guarantee.
4. CONTROL AND FUNCTIONAL ELEMENTS
4.1 The fire door
The fire door (viewing window door) must always be closed during heating
operation and may only be opened to insert wood. The automatic closing of this
door is effected by a torsional spring (this spring must under no cicumstances
be put out of operation). See the first design in DIN 18891. The spring is
subject to wear and must be checked regularly and exchanged as required).
The lock must be effected manually. To add fuel, slowly open the fire door after
extinction of the flames in order to avoid the discharge of smoke and flying ash
into the living area.
4.2 The primary air
The stove has a primary air damper for fine air adjustment, this is under the fire
door.