Faber FEG4916F, Инструкция по эксплуатации

Страница: 18 / 140

18
© 2019 Mertik Maxitr
ol GmbH & Co
. K
G, All Righ
ts R
es
erv
ed
.
selected
1
ON
AM
PM
OFF
ON TIME SETTING (PROGRAM 1):
7. , , ON is displayed, is
displayed shortly, and hour flashes.
8. To select hour press
To confirm press
To confirm press
To confirm press
To confirm press
or button.
9. button. , , ON
is displayed, displayed shortly,
and minutes flash.
10. To select minutes press or
button.
11. button.
OFF TIME SETTING (PROGRAM 1):
1
ON
AM
PM
OFF
12. , , OFF is displayed, is
displayed shortly, and hour flashes.
13. To select hour, press or button.
14. button. , ,
OFF is displayed, is displayed
shortly, and minutes flash.
15. To select minutes press or
button.
16. button.
NOTE: Either continue to PROGRAM 2 and set ON and OFF
times or stop programming at this point, and
PROGRAM 2 remains deactivated.
NOTE:
PROGRAM 1 and 2 use the same
ON
(Thermostatic)
and
OFF
temperatures for , and Daily Timer
, , , , , , ). Once a new ON (Thermostatic)
and/or OFF temperature has been set, that
temperature becomes the new default setting.
NOTE: If , or Daily Timer are programmed for
PROGRAM 1 and PROGRAM 2 ON and OFF times,
thesebecome the new default times. The batteries
must be removed to clear the PROGRAM 1 and
PROGRAM 2 ON and OFF times and temperatures.
or Daily Timer ( , , , , , , ) selected
▪ Set ON time and OFF time using same procedure as
“selected ” (above).
▪ : Set ON time and OFF time for both Saturday and Sunday.
▪ Daily Timer: Unique
Wait to finish setting.
ON and OFF times may be set for a single
day of the week, for multiple days of the week, or for every day
of the week.
2
ND
BURNER FEATURE
The latching solenoid valve will open automatically after ignition
or after switching the system OFF , so that the maximum flow of
gas is supplied to both burners assisting with the ignition process.
After pressing the button for the 2
nd
Burner the motor will turn
7 seconds in the ON direction until the max. position is reached.
ON
AM
PM
OFF
ON :
▪ To switch a burner ON , press the
button.
▪ displayed.
OFF :
▪ To switch the burner OFF , press the
button.
▪ disappears.
NOTE:
The latching solenoid valve cannot operate manually. If
the Receiver battery runs down it will remain in the last
operating position.
ECO MODE
AM
ON :
▪ Press button to enter Eco Mode.
▪ is displayed.
OFF :
1. Press button.
2. Press or button to enter Manual
Mode.
3. Press button to enter Thermostatic
Mode.
4. Press button to enter Program
Mode.
CIRCULATING FAN OPERATION
AM
Does not apply to the models
referenced in this manual.
PROGRAM MODE
(