Faber e-MatriX heat 800/500 I, Руководство по установке

Страница: 26 / 76

Installation manual e-MatriX heat 800/500 I,II,III and e-MatriX heat 800/650 I,II,III
25 < < < <
1 Dear user
Congratulations on your purchase of a Faber fire! A
quality product from which you will experience
warmth and atmosphere for many years. We
recommend that you read this manual carefully
before using the fireplace. If any problem arises
despite our strict quality control, you can always
contact your dealer or Glen Dimplex Benelux B.V.
For any warranty claims, it is essential you first
register your fireplace. During this registration,
you’ll find all information regarding our warranty.

Please note!
The details of your fireplace can be found in
the user manual.
You can register your fire at:
www.faberfires.com
Glen Dimplex Benelux B.V.
Address: Saturnus 8
NL-8448 CC
Heerenveen
Tel: +31 (0)513 656 500
Email: contact@faberfires.com
Info:
www.faberfires.com
1.1 Introduction
Only have the fire installed by a qualified installer
according to the water and electric safety
Regulations. Read this installation manual properly.
Where the installation instructions are not clear,
national/local regulations must be followed.
1.2 Check

Check the fire for transport damage and
report any damage immediately to your
supplier.

Check whether all of the parts below are
included:
o
Control box
o
Remote (incl. batteries)
o
Decoration material
o
Suction cups (2x)
o
Handles for removing the fuel
bed
o
Service door
o
Spare transducers (2x) and
sponge
1.3 CE declaration
The product complies with the European Safety
Standards EN60335-2-30 and the European
Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3 these cover
the essential requirements of EEC Directives
2014/35/EU and 2014/30/EU.
Product: electric fire Opti-myst
Model: e-MatriX heat 800/500 I,II,III
e-MatriX heat 800/650 I,II,III
This declaration will become null and void as soon
as the unit is in any way modified without written
authorization of Glen Dimplex Benelux B.V.
2 Safety instructions

Do not use outdoors.

Do not use in the immediate surroundings
of a bath, shower or swimming pool.

Do not use on deep pile carpets or on long
hair type of rugs.

Do not use the appliance without the
glass installed.

Do not locate the appliance immediately
below a fixed socket outlet or connection
box.

The fire must be installed according this
manual.
3 Installation requirements
3.1 Water supply

Install a water connection with an ½” or
¾” external thread connection, placed at
an accessible location.

Install an EA backflow protection valve,
this is not included with the appliance.

Water pressure on the appliance between
0,5 and 8 Bar. Where required, use a
pressure reducing valve.
3.2 Power supply
Electric connection -230VAC/50Hz earthed and
placed at an accessible location.
4 Preparation and installation
instructions
4.1 Preparing the fire

Ensure that all packing items are
removed.

Remove the transport screw on the front,
see fig. 1.0.

Remove the front glass and store it at a
safe place, see chapter 5.

Remove the fuel bed and store it at a safe
place, see chapter 6.