Faber BASKET BSK20, Руководство пользователя

Страница: 55 / 60

Operation
The manual controls for the Log Grate are located on the right side (Figure 3).
A. On/Off Switch.
Supplies power to the Log Grate
B. Momentary Button
Pressing this button toggles between Logs, Logs and fl ame effect, and Off.
Remote Control
The unit is supplied with a radio frequency remote control. This remote control has a range of
approximatly 15m. It does not have to be pointed at the fi replace and can pass through most
obstacles (including walls). It is supplied with one of 243 independent frequencies to prevent
interference with other units. The frequency designation is indicated on the back of the remote
control.
Note: Before attempting any operation with the remote control, pull the plastic insulator strip out
from between the remote casing and the battery cover (Figure 4).
Remote Control Initialisation/Reprogramming
Follow these steps for remote control initialisation and if required, re-initialisation;
Unplug the power adaptor from the unit. 1.
Wait a minimum of fi ve seconds and then plug the power adapter back into the unit 2.
Within ten seconds of re-acquiring power, press the ON button located on the remote 3.
control (Figure 4)
This will synchronize the remote control and the receiver
Remote Control Usage
Pressing the On button, on the remote control, switches between the two levels:
Level 1: The Logs and lights are turned on.
Level 2: The logs and lights remain on and the fl ame effect is activated.
The fi replace can be turned off at any point by pressing the OFF button on the remote control.
53