Faber BASKET BSK20, Руководство пользователя

Страница: 48 / 60

4. Unpack the transducer (contained within the water reservoir) which has been wrapped to protect
it during shipping. See Figure 1.
To access the transducer;
Remove the top cover by turning the retaining tabs on both ends of the water reservoir. •
Remove any packaging material. •
Install the transducer so that it is sitting level in the circular holding area in the resevoir. •
Orientate the transducer wire so that it does not sit directly above the Emitter and the wire •
passes through the slit in the side of the tank.
Reinstall the top cover and ensure both retaining tabs have been turned so that they are pointing •
inwards.
Note: Completely assemble the unit before fi lling the water
46