Installation Instructions
VI-COWL
Product Number: VC2900
2010 - 2018 DODGE 2500
Copyright 2009 Fab Fours, Inc
. Page 6 of 19
VC2900_Installation_Manual_REV_A
III.
Factory Vehicle Prep
a.
Apply Blue tape on each side of the hood and fender. Mark the tape with a
straight-line perpendicular with the hood and fender body seam. Use a
knife to cut the tape along the same seam.
Note: Step one is recommended to assist you in realignment of the hood during
reassembly.
Fig 1
b.
Loosen the four nuts that secure the hood to the upper hood hinge bracket,
so they can be removed by hand as shown in
Fig 1
labeled
(2)
.
c.
Disconnect any electrical connections and washer fluid lines if your
vehicle is equipped.
d.
With a friend on the other side, support the hood and fully remove the
hood bolts and remove the hood.
