FAAC XTR B, Руководство пользователя, Страница: 14 / 24

XTR B 6 3FW#
4
SW2 SW2
1
® ®
2
® ®
3
® ®
FIRST STORAGE PROCEDURE ( BUS - RELAY IN -
TERFACE )
All Tags enabled during the First storage procedure
are Master tags.
L
The Master Tags allow additional tags to
be added.
The XTR B must be in standby. The memory of the
Group selected must be empty.
1. Select the group: press the button the same
number of times as the number of the Group
(eg.: Group 3, press 3 times).
- After 2 s, the XTR B will beep and flash the same
number of times as the number of the Group.
-
It will flash for 20 s (storing enabled).
2.
Bring the Tag close to the reader.
- The XTR B will beep the same number of times as
the number of the Group and the LEDs will come
on for 2 s: the Tag is enabled.
-
Flashing will resume for 10 s (storing enabled).
3.
Repeat step
2
for further Tags.
- The XTR B will beep once and the LEDs will
come on for 2 s after each additional Tag has
been enabled.
4.
To finish, let 10 s pass without bringing any
new Tags up to the reader (or press the button
immediately).
- The LEDs turn off: XTR B in standby.
Repeat the procedure to enable another Group. At
step
1
, assign an available Group.
Errors during storage process Solution
At step
1
the XTR B signals an
error, then the LEDs turn off:
Group not available
Repeat the process
correctly
At step
1
the XTR B, after a series
of beeps equal to the number of
the Group, the memorisation is
not active (LEDs on, No flashing
for 20 sec): the Group is already
stored in the memory
Carry out the “Add
Tag” process for
the group
At step 3 , the XTR B signals an
error, then the LEDs turn off: the
Tag was not stored
Carry out the “Add
Tag” process for
the group
L
ERROR warning: 5 beeps and 5 flashes in
quick succession.
FIRST STORAGE PROCEDURE
(BUS-RELAY interface)
N
times (N = Group number)
First Master Tag of the Group
Additional Master Tag of
the Group

timeout without Tag:
{
END
...

20 s MAX
N

+
z
2 s: Tag OK ,
¿
10 s (

timeout)
1

+
z
2 s: Tag OK ,
¿
10 s

timeout
...

10 s MAX

2 s N (

¿
) ,
¿
20 s (

timeout)