FAAC XTR B, Руководство пользователя, Страница: 12 / 24

XTR B 4 3FW#
4
SW2 SW2
1
® ®
2
® ®
3
® ®
FIRST STORAGE PROCEDURE
(board with BUS 2easy)
First Master Tag
Additional Master Tags
FIRST STORAGE PROCEDURE ( BOARD WITH
BUS 2EASY )
All Tags enabled during the First storage procedure
are Master tags.
L
The Master Tags allow additional tags to
be added.
The XTR B must be in standby. The memory must
be empty.
1. Press and release the button once.
-
After 2 s, the XTR B will beep once and flash once.
- It will flash for 20 s (storing enabled).
2. Bring the first Tag up to the reader.
- The XTR B will beep once and the LEDs will come
on for 2 s: the Tag is enabled.
-
Flashing will resume for 10 s (storing enabled).
3. Repeat step 2 for further Tags.
4. To finish, let 10 s pass without bringing any
new Tags up to the reader (or press the button
immediately).
- The LEDs turn off: XTR B in standby.
Errors during storage process Solution
At step 1 the XTR B signals an er-
ror and switches off in standby:
the button has been pressed
more than once
Repeat the pro-
cess correctly
At step 1 , the XTR B signals an
error and turns off in standby:
the memory is not empty
Carry out the “Add
Tag” or “Total De-
letion” process
At step 3 , the XTR B signals an
error, then the LEDs turn off: the
Tag has not been stored
Carry out the “Add
Tag” process
L
ERROR warning: 5 beeps and 5 flashes in
quick succession.

timeout without Tag:
{
END
...

20 s MAX
1

+
z
2 s: Tag OK ,
¿
10 s (

timeout)
1

+
z
2 s: Tag OK ,
¿
10 s

timeout
...

10 s MAX

2 s 1(

¿
) ,
¿
20 s (

timeout)