XKP W
9
532110 - Rev.A
TEACH A RADIO CONTROL
When the XKP W is waiting for an operation, enter:
8 # Ch
25 s
E.g. transmit the Ch 1 radio code: 8 # 1
Bring the two devices into contact with one another within 25 s, as shown in the figure, then press:
#
(keep it pressed until confirmation is given that the code has been learnt, then release it)
60 s
The code of the radio channel entered is transmitted (Green LED on). At the same time, press the button
of the radio control and make sure that the confirmation is given (the LED of the radio control will flash
twice and then switch off).
Repeat the procedure for each radio channel required. When using the radio control for the first time,
each radio channel has to be activated twice in quick succession
.
Teaching XKP W
Learning radio control
