![background image](http://html1.mh-extra.com/html/faac/t-mode-tm-45-e/t-mode-tm-45-e_manual_3117238005.webp)
=
=
=
L
N
230 V ~
OK
L
ENGLISH
5
3.3 ELECTRIC CONNECTIONS
1) Before attempting any job on the system, cut the power supply off.
2) The power mains of the automated system must be fitted with a multi-pole power switch with a switch-contact
gap of at least 3 mm.
3) For the set-up, use non-interlocked buttons or use the XTM PROG programmer.
4) Wire according to the scheme; if the motor rotates in the opposite direction do not reverse the black and
brown wires, as, at the end of the set-up, the up/down buttons are automatically matched to the correct rota-
tion direction.
5) Several remote control buttons can be connected with the same motor.
1) Connect the wires from the motor to two buttons
(NOT INTERLOCKED BY SET-UP)
,
the black wire to the up button and
the brown wire to the down button.
(Figure 6)
2) Connect the buttons with the line according to figure 6.
3) Supply the motor and press the up/down buttons to check their operation.
If the motor rotates in the opposite direc-
tion do not reverse the black and brown wires, as, at the end of the set-up, the up/down buttons are automatically
matched to the correct rotation direction.
Fig. 6
Fig. 7
4 SET-UP
The SET-UP procedure enables to set the up/down travel stop and the correct functions for the rolling shutter to
be motor-driven by pressing suitably connected buttons (ROLLER SHUTTER MODE, UNIVERSAL AWNING MODE AND
CASSETTE AWNING MODE).
The SET-UP procedure can be in AUTOMATIC mode (with two modes) or in MANUAL mode.
The
AUTOMATIC SET-UP
is possible for roller shutters only.
The
MANUAL SET-UP
is possible for all applications (ROLLER SHUTTER, STANDARD AWNING OR CASSETTE AWNING).
If the set-up has not been performed or completed, the motor does not move smoothly pressing a control button but makes
a small step.
If the XTM PROG programmer is used for the set-up, pressing simultaneously the two buttons corre-
sponds to pressing the red “SET-UP” button, while the up/down buttons correspond to the buttons “L1”
and “L2”.
L 2
L 1
BLACK
BROWN
BLUE
BLACK
BROWN
UP
DOWN
YELLOW
GREEN
Содержание T-MODE TM 45 E
Страница 1: ...T MODE TM 45 E TM 58 E...