manualshive.com logo in svg

FAAC T-MODE TM 35 ER, Руководство пользователя

Поделиться
Скачать
FAAC T-MODE TM 35 ER Скачать руководство пользователя страница 24

X 1

X 1

ENGLISH

24

X 1

X 2

X 3

MOTOR MOVEMENTS IN BOTH 

DIRECTIONS ON SWITCHING-ON

MOTOR STATUS

0  MOVEMENTS

TRAVEL LIMITS SET AND MOTOR READY TO START

1  MOVEMENT

FACTORY SETTING 

(opening and closing travel limits not set, perform the set-up procedure and, if 

necessary, the adjustment of the torque and of the obstacle detection sensitivity)

2  MOVEMENTS

TRAVEL LIMITS SETTING PROCEDURE NOT COMPLETED

ONLY UP TRAVEL LIMIT SET

(Execute a reset and then the travel limits setting procedure)

3  MOVEMENTS

YOU ARE IN THE ADVANCED MENU (see chapter 9)

( hold down the STOP/PREFERRED POSITION push-button to exit )

    IF YOU WANT TO CHECK THE MOTOR STATUS, CUT POWER TO IT, SUPPLY POWER AGAIN AND CHECK THE NUMBER OF MOVEMENTS 

PERFORMED BY THE MOTOR  (independently of the fact if there are or not memory stored radio accessories)

10.2  MODIFYING THE PREFERRED POSITION

1) Press the stop/preferred position push-button for 4 seconds to delete the position previously stored in the memory.

2) The motor performs a brief movement in both directions to confirm the performed deletion

If you want to set a new preferred position, perform the procedure described in chapter 10.1

10  PREFERRED POSITION

10.1  MEMORY-STORING THE PREFERRED POSITION

   A   P R E F E R R E D   P O S I T I O N   C A N   B E   D E F I N E D   O N   T H E   R O L L I N G   S H U T T E R .   T H I S   P O S I T I O N   C A N 

ONLY BE REACHED WHEN THE MOTOR IS AT REST BY PRESSING THE STOP/PREFERRED POSITION PUSH-BUTTON. 
THERE IS NO MEMORY STORED PREFERRED POSITION BY FACTORY SETTING. THE PREFERRED POSITION CAN ONLY BE MEMORY 
STORED AFTER HAVING SET THE TRAVEL LIMITS

1) Press the up or down push-button to operate the motor.

2) Once the “preferred position” has been reached, press the stop/preferred position push-button to lock the rolling 

shutter.

3) Press the stop/preferred position push-button for 4 seconds to memory store the position.

4) The motor performs 2 brief movements in both directions to confirm the performed memory storing.

5  seconds

DETECTION END AREA

OBSTACLE DETECTION
AREA

11 TROUBLESHOOTING 

Содержание T-MODE TM 35 ER



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды