![background image](http://html2.mh-extra.com/html/faac/s450/s450_instruction-manual_3065115006.webp)
6
FAAC Model S450H 24V Hydraulic Swing Gate Operator
Model S450H 24V Hydraulic Swing Gate Operator
2
1
1
2
2
2
5
3
4
6
6
RX
RX
TX
TX
7
a
b
c
d
e
f
g
1. DESCRIPTION AND TECHNICAL
SPECIFICATIONS
1.1 DIMENSIONS
a
Front fitting
b
Cover
c
Emergency release with key
d
Plastic cover for rear bracket
e
Rear bracket
f
Encoder
g
Spacer for opening positive stop
TECHNICAL
SPECIFICATIONS
CBAC
OPERATOR
SB
OPERATOR
Power Supply (VDC)
24 - 36
Power Consumption (W)
70 (nominal) - 288 (maximum)
Protection Class
IP 55
Operating Temperature
-4°F to +113°F
Hydraulic Lock
Installed
Not installed
Max. Traction/Thrust Force (lbf) 1124
Maximum leaf length (feet)
14
17
Duty cycle at 68 °F
Continuous
Class of Operation
Residential, Commercial
Linear Rod Speed
adjustable up to 1"/sec
Effective Rod Stroke (inches)
12 1/4
Operator Weight (lbs)
15.6
15.2
2.
ELECTRICAL SETUP
S450H 2 x AWG 14 (max 65’) AWG 12 (max 115’)
AWG 10 (max 165’)
encoder 2 x AWG 20
RX Photocells (receiver) 4 x AWG 20
TX Photocells (transmitter) 2 x AWG 20
Electronic control unit AC power 3 x AWG 14
Key-operated push-button 2 x AWG 20
Flashing lamp 24 V dc 2 x AWG 16
Opening positive stops*
Electric lock and closing mechanical stop 2 x AWG 14
* Not necessary when using built in positive stops (Fig.1 Ref. g).
3. INSTALLING THE OPERATOR
Ensure that the following conditions have been met to ensure
safety and the efficient operation of the automated system:
•
The gate structure must be suitable for automation.
Verify that it is sufficiently strong and that its dimensions
correspond to those stated in the technical specifications.
•
Verify the smooth and uniform movement of leaves, without
irregular friction during the entire travel.
•
Verify the good condition of hinges.
•
Remove any locks and bolts.
•
Carry out any metalwork operations before installing the
automated system.
Fig. 1
The FAAC S450H automated system for swing-leaf gates con-
sists of an electrical pump and an hydraulic piston transmitting
the leaf movement, assembled in a single block.
The model with hydraulic locking does not require the instal-
lation of electric locks and guarantees that the leaf is me-
chanically blocked when the motor is not in operation. The
model without hydraulic locking always needs one or more
electric locks to guarantee that the leaf mechanically locks.
The
S450H automated systems have been designed and
built to automate swing-leaf gates. Avoid any other use,
whatsoever.
Fig. 3
43¾
29½
12¼
4¾
3⅜
3⅜
Dimensions in Inches
Fig. 2