![background image](http://html.mh-extra.com/html/faac/parqube-le/parqube-le_installation-manual_535288035.webp)
35
4.1.1.3. Reset and presence time
Dip switches 3 and 7 allow you to set a max. constant detection time of 5 minutes, after which it is automatically reset and
then self-calibrated.
This type of setting is not recommended in parking systems since the vehicles may remain a long time on the loops while
waiting in the queue.
Presence time
Channel 1
Channel 2
5 minutes
DIP 03 = OFF
DIP 07 = OFF
Infinite (♦)
DIP 03 = ON
DIP 07 = ON
4.1.1.4. Signaling LED
The green LED displays the operating status of the channel of the detector, whereas the red LED provides status information
of the relay, depending on the condition of the loop. The signals are shown separately for each of the two channels.
The table below summarises the detected conditions.
Detector status
Green LED (Channel status)
Red LED (Vehicle on loop)
Not powered
OFF
OFF
Self calibration
Flashing
OFF
Vacant loop
ON
OFF
Busy loop
ON
ON
Fault loop
OFF
ON
Ver. 1.0 - 21st Nov. 2014 - ENG
Содержание PARQUBE LE
