![background image](http://html.mh-extra.com/html/faac/parqube-le/parqube-le_installation-manual_535288037.webp)
37
4.2.2. Function jumper
The function which is delegated to the ControllerPlus board is defined by the position of a Jumper on connector CN1,
according to the specifications indicated in the table below.
It is essential to check that the Jumper is inserted correctly. All peripherals are supplied with the
Jumper already set in the correct position.
Switch off the electronic board before to move the jumper position
The ControllerPlus sets its function during the boot loading sequence.
Jumper position
in CN1
Function description
Notes
A
ParQube LE
B
ParQube Fee Computer
C
ParQube LS
D
ParQube Access Reader / Counter
E
ParQube LX
F
ParQube APS
G
Not used
Boards ordered as spare parts are delivered with
the Jumper set in this position.
Figure 22 -
Jumper positioning
Figure 23 -
Jumper inserted at "A"
Ver. 1.0 - 21st Nov. 2014 - ENG
Содержание PARQUBE LE
